Hazard Communication (HazCom) and GHS
- General training on labels, pictograms and safety data sheets
- Fits new hires before their first chemical task
- Pairs with your own site walk-through
By profession
Workplace Safety (OSHA)
If your people work with cleaners, solvents, fuels, paints or any other hazardous chemical, OSHA expects you to train them before they start and again when a new hazard arrives. This guide sets out the exact topics in 29 CFR 1910.1200(h), the dates in the 2024 update, and a simple way to get a team trained and documented this week.
Under 29 CFR 1910.1200(h), every employer whose workers may be exposed to hazardous chemicals under normal working conditions must give them effective information and training at their initial assignment and whenever a new chemical hazard enters their work area. The training must cover how to detect a release, the physical and health hazards, how workers protect themselves, and your own hazard communication program, including labels and safety data sheets. OSHA does not set a fixed number of hours or a yearly refresher, but the training has to be in a language and vocabulary your workers understand. For hazards newly identified under the 2024 update, employers have until November 20, 2026 for substances and May 19, 2028 for mixtures to bring labels, the written program and training up to date.
Need the general HazCom part done now? The Hazard Communication (HazCom) and GHS course explains labels, pictograms and safety data sheets online, with an instant certificate after you finish. Add your site walk-through and the record is complete.
Start the HazCom and GHS courseMost HazCom questions reach us from two kinds of people. One is a supervisor or owner who has just hired someone, or switched to a stronger floor cleaner, and wonders whether that triggers training. The other is a worker whose new employer asked for a HazCom certificate before the first shift. Both are asking the same thing: what exactly does OSHA want covered, and what proof is sensible to keep?
The answer is shorter than many vendor checklists suggest. The federal standard names four training topics and three information items. It leaves the method to you, so long as the training is effective. Part of it is general knowledge that an online course can deliver well; part of it is about your building, your chemicals and your safety data sheet binder, and only you can deliver that part. This guide separates the two so you can get both done quickly.

The standard applies to "all employers" with hazardous chemicals in the workplace, and its training duty runs to every employee, which 1910.1200 defines as a worker who may be exposed to hazardous chemicals under normal operating conditions or in a foreseeable emergency. It expressly leaves out workers such as office staff or bank tellers who meet a chemical only in isolated, non-routine instances. Some products are outside the standard altogether: the exemption list in paragraph (b)(6) includes, for example, hazardous waste regulated under RCRA, tobacco products, articles, retail food, and consumer products used the way an ordinary consumer would use them.
In practice that captures far more workplaces than people expect: cleaning and janitorial crews, maintenance staff, auto shops, salons, print shops, labs, warehouses that handle leaking containers, restaurant kitchens that use concentrated sanitizers, school custodians and nursing home housekeeping teams. Use this quick decision path for each job role.
Paragraph (h) has two parts. Paragraph (h)(2) lists the information employees must receive, and paragraph (h)(3) lists the minimum training content. Training may be organized by categories of hazards (for example flammables or corrosives) rather than chemical by chemical, but chemical-specific information must always be available through labels and safety data sheets.
Methods and observations that show a hazardous chemical is present or has been released: monitoring by the employer, continuous monitoring devices, and the look or smell of the chemical.
Physical and health hazards of the chemicals in the work area, including simple asphyxiation, combustible dust, pyrophoric gas and hazards not otherwise classified.
The measures workers can take, including the specific work practices, emergency procedures and personal protective equipment you have put in place.
The details of your written program, an explanation of shipped labels and your workplace labeling system, and the safety data sheet, including the order of information and how to get and use it.
On top of the four training topics, paragraph (h)(2) requires you to tell employees three things: that the standard exists and what it requires, which operations in their work area involve hazardous chemicals, and where the written program, the chemical list and the safety data sheets are kept and how to reach them.
The "order of information" point matters more than it sounds. Paragraph (g)(2) and Appendix D fix every safety data sheet into the same 16 numbered sections, from Section 1 (identification) to Section 16 (other information, including the date of the last revision). A worker who knows that first aid is always in Section 4 and spill steps are always in Section 6 can find what they need in seconds, whatever brand is on the drum.
| Required item | General course can teach it? | What you still add on site |
|---|---|---|
| Purpose and requirements of the standard, (h)(2)(i) | Yes | Nothing beyond a quick recap |
| Operations with hazardous chemicals, (h)(2)(ii) | No | Walk the area and name the tasks |
| Where the program, chemical list and SDSs are, (h)(2)(iii) | No | Show the binder or the electronic SDS station |
| Detecting a release, (h)(3)(i) | In general terms | Your alarms, monitors and the odors that matter here |
| Physical and health hazard classes, (h)(3)(ii) | Yes, by category | The classes of the products your team actually uses |
| Protective measures, (h)(3)(iii) | In general terms | Your PPE, ventilation, spill kit and emergency steps |
| Labels, pictograms and SDS format, (h)(3)(iv) | Yes | Your own secondary-container labeling system |
That split is the honest picture. OSHA's small entity guide notes that trade associations, unions and schools can provide general training, but some training always has to happen on site, such as telling workers where your written program and safety data sheets are kept. A course such as Hazard Communication (HazCom) and GHS handles the general rows well; a 15 to 20 minute walk-through by a supervisor closes the site-specific ones.
The standard sets two triggers in paragraph (h)(1): at the time of a worker's initial assignment, and whenever a new chemical hazard that workers have not been trained on is introduced into their work area. OSHA's small entity guide states plainly that the standard does not require retraining on a regular schedule. Many employers still run a short yearly refresher because people forget, and because it is an easy way to check the training is still effective.
Prior training is a head start, not a pass. OSHA's guide says a worker's previous training and experience may reduce what you need to cover, but the employer stays responsible for making sure each worker is adequately trained for this workplace. Accept a certificate from a previous job as evidence of general knowledge, then do your own site walk-through and record it.
OSHA published a final rule updating the standard on May 20, 2024 (89 FR 44144), aligning it mainly with Revision 7 of the UN Globally Harmonized System. Among other changes, it revised some hazard classification criteria, added categories for aerosols, desensitized explosives and flammable gases, added labeling provisions for small containers (with special treatment for very small containers of 3 ml or less), and changed how labels are updated for containers already released for shipment. On January 15, 2026, OSHA pushed every compliance date back four months (91 FR 1695) because guidance was not ready in time.
Manufacturers, importers and distributors evaluating substances had to comply with the modified provisions, which means updated classifications, labels and safety data sheets start reaching customers.
Employers must update any alternative workplace labeling, the written hazard communication program, and employee information and training for newly identified physical or health hazards of substances.
The same supplier duties apply to mixtures, which covers most commercial cleaners, paints and coatings.
Employers complete the same label, program and training updates for newly identified hazards of mixtures.
Until those dates, the regulation allows employers to follow either the current text or the version in effect on July 1, 2023, or both. The practical message for a manager is simple: when a supplier sends an updated safety data sheet that lists a new hazard, check whether your training already covers that hazard class. If it does not, train before the deadline. Workers who completed general GHS training still recognize the same pictograms and label layout, so the update is usually a short add-on, not a full restart.
OSHA's guide says employers can provide information and training "through whatever means are found appropriate", and its sample program lists interactive computer programs among the formats an employer might use. What matters is the result: workers must actually understand the hazards and how to protect themselves. The same guide says training must be presented "in a manner and language" employees can understand, and that handing written material to a worker who cannot read it does not meet the obligation.
Three habits make online training hold up well:
If you also need a wider safety foundation for new starters, the Workplace Safety Fundamentals course fits before HazCom, and the Personal Protective Equipment (PPE) course supports the "protect yourself" topic in (h)(3)(iii). You can see every safety title in one place on our workplace safety course catalog.
Hazard Communication sits second on OSHA's preliminary list of most frequently cited standards for fiscal year 2026, which covers October 1, 2025 through August 31, 2026. These are the misreadings we see most often when employers ask us for help.
We only use store-bought cleaners, so HazCom does not apply.
The consumer product exemption only fits when use matches what a household consumer would do in duration and frequency. A janitor using the same product all shift is usually covered.
The supplier's label is enough; we do not need a written program.
Paragraph (e)(1) requires a written hazard communication program at each workplace, with a list of hazardous chemicals and a description of how labels, safety data sheets and training are handled.
Everyone needs a fresh HazCom course every year by law.
The federal standard has no fixed refresher cycle. Training is triggered by initial assignment and new hazards. A yearly refresher is good practice, not a federal requirement.
A certificate from another employer means the worker is trained here.
Prior training can reduce your burden, but you remain responsible, and the location of your program and safety data sheets has to be covered on site.
A 25-person commercial cleaning company switches to a concentrated disinfectant that must be diluted on site. The new safety data sheet lists a corrosive hazard that the team's old products did not have. The owner assigns the general HazCom and GHS course to all staff, then holds a 20 minute briefing at the dilution station: where the safety data sheets live in the van, which gloves and goggles to wear, how to label spray bottles under the company's own system, and what to do after a splash to the eyes. Each worker signs a one-page sign-in sheet that lists the topics and the product name, and the course certificates go into the same folder. If an inspector asks, the company can show what was taught, to whom, and when.
Walk each work area with your safety data sheet collection and write down the products, their hazard classes and which job roles use them, so you know exactly who needs training.
Make sure a written hazard communication program exists for each workplace, with the chemical list, your labeling system, where safety data sheets are kept and how training is done.
Give every covered worker a general course on labels, pictograms, hazard classes and safety data sheets before their first assignment, in a language they understand.
Show the safety data sheet location, the operations that involve chemicals, your PPE and spill steps, and your secondary container labels, and answer questions.
As updated sheets arrive under the 2024 rule, check for newly identified hazards and train on any new hazard class by November 20, 2026 for substances and May 19, 2028 for mixtures.
File a sign-in sheet with date, trainer, topics and products covered, plus each course certificate, so you can show who was trained and when.
To schedule this across a whole team, put the HazCom course, the site briefing date and any refreshers into our free Employer Training Planner. If you are also reviewing tasks for the protective measures topic, the job hazard analysis builder helps you write down each step, its chemical hazard and its control.
Your list is done. Now get the training on file.Assign Hazard Communication (HazCom) and GHS to each covered worker today; it takes about 2 contact hours and ends with a downloadable certificate of completion.
Assign the HazCom courseThe standard does not require training records, so nothing below is a legal checklist. It is what makes your training easy to prove. Keep it with the written program, because inspectors usually ask for both together.
Many employers keep these files next to their other mandatory training, such as the HIPAA workforce training records a clinic keeps, or the yearly state harassment prevention training some states require. One calendar for all of them reduces missed deadlines. For injury records, which are a separate OSHA duty under Part 1904, our OSHA recordability checker walks you through whether a case goes on the log.
Not under the federal standard. 29 CFR 1910.1200(h)(1) requires training at initial assignment and whenever a new chemical hazard is introduced into the work area. OSHA's small entity guide confirms there is no required retraining schedule, although many employers run a yearly refresher as good practice. Check your State Plan or company policy for any extra rule.
None. The standard sets the topics, not a minimum length. Training must be effective and cover detecting releases, the hazards, protective measures and your program, labels and safety data sheets, plus the information items in paragraph (h)(2).
OSHA lets employers choose the method, and its guide lists interactive computer programs as one format. Online training works well for the general content on labels, pictograms and safety data sheets. You still need to cover site-specific items in person, such as where your safety data sheets are kept and which operations involve hazardous chemicals.
The Hazard Communication Standard does not require training records. OSHA's guide notes that many employers keep them anyway, and a dated sign-in sheet plus course certificates is the simplest way to show an inspector who was trained and when.
It is the date by which employers must update alternative workplace labeling, the written program and employee training for newly identified physical or health hazards of substances under the 2024 update, as extended by OSHA in January 2026. For mixtures the employer date is May 19, 2028.
Usually not. The standard's definition of employee leaves out workers such as office staff who meet hazardous chemicals only in isolated, non-routine instances. An office worker who regularly refills toner, uses solvents or handles cleaning chemicals as part of the job may be covered.
It can reduce what you need to cover, but OSHA says the employer remains responsible for making sure each worker is adequately trained. Treat the certificate as proof of general knowledge and add your own site briefing on your chemicals, program and safety data sheet location.
HazCom training is not a yearly box to tick under the federal rule. It is due when a worker starts and when a new hazard arrives, and it must leave people able to read a label, find a safety data sheet and protect themselves. Cover the general content with a course, cover your own site in person, keep a dated record, and watch incoming safety data sheets for the new hazards the 2024 update will bring. Teams can start today with Hazard Communication (HazCom) and GHS, or browse all courses at CE Courses Hub.
Pick the general HazCom training first, then add the safety topics your chemical tasks call for. Every course ends with a certificate of completion you can file with your site briefing record.
Courses award a certificate of completion for the contact hours shown. How CE credit works.
CE Courses Hub Editorial Team. We checked the regulation text, both Federal Register notices and OSHA's own guidance listed above on . OSHA can change dates again, so confirm the current text before you rely on it. Read our editorial and review policy.
General information for US workers and employers, not legal advice.
Team seats let you send each worker their own access and keep every HazCom certificate in one place. Tell us your headcount and we will help you set it up.